Número de artículo: 78010147
Pague de forma segura y rápida con:
La instalación Maxivent by Econox M4512 es una unidad de ventilación equilibrada altamente eficiente, potente, avanzada y versátil con recuperación de calor, diseñada específicamente para oficinas, consultorios y edificaciones de servicios a pequeña escala. Con un caudal nominal de 1200 m³/h y una recuperación de calor superior al 80%, esta unidad de tratamiento de aire es ideal para tu próximo proyecto de edificación de servicios donde la ventilación continua sin pérdida de energía es fundamental. La unidad de tratamiento de aire funciona mediante un eficiente intercambiador de contraflujo, ventiladores EC, un panel de control integrado y un mando a distancia con cable de 10 m. Está diseñada para montaje en suelo con conexión plug & play y cuenta con asas en el lado derecho para facilitar la apertura y el mantenimiento.
| Marca | Maxivent |
| Categoría | Maxivent M45 contracorriente - conexión lateral low profile |
| GTIN | 8719544339898 |
| Número de artículo del fabricante | 78010472 |
| Número de artículo | 78010472 |
| Código de categoría | 261 |
| Housing material | Steel, lined |
| Max. air volume at 50 Pa | 1897 m³/h |
| Max. air volume at 100 Pa | 1841 m³/h |
| Max. air volume at 150 Pa | 1784 m³/h |
| Max. air volume at 200 Pa | 1726 m³/h |
| Max. air volume at 250 Pa | 1667 m³/h |
| Max. air volume at 300 Pa | 1606 m³/h |
| Max. air volume at 400 Pa | 1480 m³/h |
| Max. air volume at 500 Pa | 1347 m³/h |
| Max. air volume at 600 Pa | 1206 m³/h |
| Fan type | Direct |
| Type of motor | Electronically commutated (EC) |
| Number of fan levels | 3 |
| Heat recovery by | Counter current unit |
| Material heat exchanger | Aluminium |
| Type of cooling coil | Water/glycol |
| Type of heating coil | Electrical heating element |
| Change-over system | Sí |
| With bypass | No |
| Supply filter according to ISO 16890-1:2016 | ISO ePM1 |
| Efficiency supply filter according to ISO 16890-1:2016 | 50 % |
| Exhaust filter according to ISO 16890-1:2016 | ISO ePM10 |
| Efficiency exhaust filter according to ISO 16890-1:2016 | 50 % |
| With condensate drain | Sí |
| Frost protection circuit | Sí |
| With constant pressure control | Sí |
| With constant volume flow control | Sí |
| Connection voltage | 3x 400 V AC +N |
| Electrical connection | Terminals |
| With thermal overload protection | No |
| Power consumption | 1.1 kW |
| Thermal efficiency | 81 % |
| Suitable for electronic control | Sí |
| With rotational speed/frequency control | Sí |
| Nominal duct width indoor connection | 460 mm |
| Nominal duct height indoor connection | 490 mm |
| Nominal duct width, outdoor connection | 460 mm |
| Nominal duct height, outdoor connection | 490 mm |
| Nominal duct diameter, indoor connection | 315 mm |
| Nominal duct diameter, outdoor connection | 315 mm |
| Conexión | Flange |
| Degree of protection (IP) | IP54 |
| Longitud | 2190 mm |
| Anchura | 1230 mm |
| Altura | 600 mm |
| With roof plate | No |
| With support frame | Sí |
| Weight | 289 kg |
| Device emplacement | Indoor and outdoor positioning |