- 2 artículos en stock
Número de artículo: 78010166
Pague de forma segura y rápida con:
La instalación Maxivent by Econox M4512 es una unidad de ventilación balanceada altamente eficiente, robusta, avanzada y versátil con recuperación de calor, diseñada especialmente para oficinas, consultas y pequeños edificios comerciales. Con una capacidad nominal de 1200 m³/h y una recuperación térmica superior al 80%, esta unidad de tratamiento de aire es ideal para tu próximo proyecto comercial que requiera ventilación continua sin pérdidas de energía. La unidad de tratamiento de aire funciona mediante un eficiente intercambiador de contraflujo, ventiladores EC, un panel de control integrado y un mando a distancia con cable de 10 m. La unidad es plug & play, diseñada para montaje en suelo, con asas en el lado izquierdo para facilitar la apertura y el mantenimiento.
| Marca | Maxivent |
| Categoría | Maxivent M45 contracorriente - conexión lateral |
| GTIN | 8719544339904 |
| Número de artículo del fabricante | 78010473 |
| Número de artículo | 78010473 |
| Código de categoría | 261 |
| Housing material | Steel, lined |
| Max. air volume at 50 Pa | 1450 m³/h |
| Max. air volume at 100 Pa | 1480 m³/h |
| Max. air volume at 150 Pa | 1525 m³/h |
| Max. air volume at 200 Pa | 1550 m³/h |
| Max. air volume at 250 Pa | 1575 m³/h |
| Max. air volume at 300 Pa | 1590 m³/h |
| Max. air volume at 400 Pa | 1500 m³/h |
| Max. air volume at 500 Pa | 1350 m³/h |
| Max. air volume at 600 Pa | 1190 m³/h |
| Fan type | Direct |
| Type of motor | Electronically commutated (EC) |
| Number of fan levels | 3 |
| Heat recovery by | Counter current unit |
| Material heat exchanger | Aluminium |
| Type of cooling coil | Water/glycol |
| Type of heating coil | Electrical heating element |
| Change-over system | Sí |
| With bypass | No |
| Supply filter according to ISO 16890-1:2016 | ISO ePM1 |
| Efficiency supply filter according to ISO 16890-1:2016 | 50 % |
| Exhaust filter according to ISO 16890-1:2016 | ISO ePM10 |
| Efficiency exhaust filter according to ISO 16890-1:2016 | 50 % |
| With condensate drain | Sí |
| Frost protection circuit | Sí |
| With constant pressure control | Sí |
| With constant volume flow control | Sí |
| Connection voltage | 3x 400 V AC +N |
| Electrical connection | Terminals |
| With thermal overload protection | No |
| Power consumption | 1.1 kW |
| Thermal efficiency | 81 % |
| Suitable for electronic control | Sí |
| With rotational speed/frequency control | No |
| Nominal duct width indoor connection | 490 mm |
| Nominal duct height indoor connection | 470 mm |
| Nominal duct width, outdoor connection | 490 mm |
| Nominal duct height, outdoor connection | 470 mm |
| Nominal duct diameter, indoor connection | 315 mm |
| Nominal duct diameter, outdoor connection | 315 mm |
| Conexión | Flange |
| Degree of protection (IP) | IP54 |
| Longitud | 2190 mm |
| Anchura | 600 mm |
| Altura | 1230 mm |
| With roof plate | No |
| With support frame | Sí |
| Weight | 301 kg |
| Device emplacement | Indoor and outdoor positioning |