- 5 artículos en stock
Número de artículo: 78010169
Pague de forma segura y rápida con:
La instalación Maxivent by Econox M4540 es una unidad de ventilación con recuperación de calor altamente eficiente, robusta, avanzada y versátil, especialmente diseñada para edificios de oficinas, instalaciones deportivas y construcciones comerciales medianas. Con un caudal nominal de aire de 4000 m³/h y una recuperación de calor superior al 80%, esta unidad de tratamiento de aire es ideal para su próximo proyecto comercial, donde la ventilación continua sin pérdida de energía es un requisito. La unidad de tratamiento de aire funciona mediante un eficiente intercambiador de contraflujo, ventiladores EC, un panel de control integrado y un mando a distancia con cable de 10 m. La unidad es plug & play, está diseñada para montaje en suelo y dispone de asas en el lado izquierdo para facilitar su apertura y mantenimiento.
| Marca | Maxivent |
| Categoría | Maxivent M45 contracorriente - conexión lateral |
| GTIN | 8719544340023 |
| Número de artículo del fabricante | 78010485 |
| Número de artículo | 78010485 |
| Código de categoría | 261 |
| Housing material | Steel, lined |
| Max. air volume at 50 Pa | 4150 m³/h |
| Max. air volume at 100 Pa | 4200 m³/h |
| Max. air volume at 150 Pa | 4250 m³/h |
| Max. air volume at 200 Pa | 4350 m³/h |
| Max. air volume at 250 Pa | 4450 m³/h |
| Max. air volume at 300 Pa | 4500 m³/h |
| Max. air volume at 400 Pa | 4350 m³/h |
| Max. air volume at 500 Pa | 4150 m³/h |
| Max. air volume at 600 Pa | 3975 m³/h |
| Fan type | Direct |
| Type of motor | Electronically commutated (EC) |
| Number of fan levels | 3 |
| Heat recovery by | Counter current unit |
| Material heat exchanger | Aluminium |
| Type of cooling coil | Water/glycol |
| Type of heating coil | Electrical heating element |
| Change-over system | Sí |
| With bypass | No |
| Supply filter according to ISO 16890-1:2016 | ISO ePM1 |
| Efficiency supply filter according to ISO 16890-1:2016 | 50 % |
| Exhaust filter according to ISO 16890-1:2016 | ISO ePM10 |
| Efficiency exhaust filter according to ISO 16890-1:2016 | 50 % |
| With condensate drain | Sí |
| Frost protection circuit | Sí |
| With constant pressure control | Sí |
| With constant volume flow control | Sí |
| Connection voltage | 3x 400 V AC +N |
| Electrical connection | Terminals |
| With thermal overload protection | No |
| Power consumption | 3.7 kW |
| Thermal efficiency | 83 % |
| Suitable for electronic control | Sí |
| Suitable for low-current control | No |
| With rotational speed/frequency control | Sí |
| Suitable for transformer control | No |
| Nominal duct width indoor connection | 940 mm |
| Nominal duct height indoor connection | 670 mm |
| Nominal duct width, outdoor connection | 940 mm |
| Nominal duct height, outdoor connection | 670 mm |
| Nominal duct diameter, indoor connection | 630 mm |
| Nominal duct diameter, outdoor connection | 630 mm |
| Conexión | Flange |
| Degree of protection (IP) | IP54 |
| Longitud | 2980 mm |
| Anchura | 1050 mm |
| Altura | 1630 mm |
| With roof plate | No |
| With support frame | Sí |
| Weight | 632 kg |
| Device emplacement | Indoor and outdoor positioning |