- 2 unidades previstas para el 13/10/2026
Número de artículo: 78010391
Pague de forma segura y rápida con:
La unidad Maxivent by Econox M4523 es un sistema de ventilación equilibrada muy eficiente, robusto, avanzado y versátil con recuperación de calor, especialmente diseñada para salas de conferencias, oficinas y edificios comerciales de pequeña a mediana escala. Con un caudal nominal de 2300 m³/h y una recuperación de calor superior al 80%, esta unidad de tratamiento de aire es ideal para tu próximo proyecto comercial donde la ventilación continua sin pérdida de energía es esencial. La unidad de tratamiento de aire funciona mediante un eficiente intercambiador de contraflujo, ventiladores EC, un panel de control integrado y un mando a distancia con cable de 10 m. Está diseñada para instalación empotrada en suelo, es plug & play y cuenta con asas en el lado izquierdo para facilitar su apertura y mantenimiento.
| Marca | Maxivent |
| Categoría | Maxivent M45 contracorriente - conexión lateral low profile |
| GTIN | 8719544339966 |
| Número de artículo del fabricante | 78010479 |
| Número de artículo | 78010479 |
| Código de categoría | 261 |
| Housing material | Steel, lined |
| Max. air volume at 50 Pa | 2500 m³/h |
| Max. air volume at 100 Pa | 2580 m³/h |
| Max. air volume at 150 Pa | 2825 m³/h |
| Max. air volume at 200 Pa | 2850 m³/h |
| Max. air volume at 250 Pa | 2775 m³/h |
| Max. air volume at 300 Pa | 2600 m³/h |
| Max. air volume at 400 Pa | 2540 m³/h |
| Max. air volume at 500 Pa | 2360 m³/h |
| Max. air volume at 600 Pa | 2150 m³/h |
| Fan type | Direct |
| Type of motor | Electronically commutated (EC) |
| Number of fan levels | 3 |
| Heat recovery by | Counter current unit |
| Material heat exchanger | Aluminium |
| Type of cooling coil | Water/glycol |
| Type of heating coil | Electrical heating element |
| Change-over system | Sí |
| With bypass | No |
| Supply filter according to ISO 16890-1:2016 | ISO ePM1 |
| Efficiency supply filter according to ISO 16890-1:2016 | 50 % |
| Exhaust filter according to ISO 16890-1:2016 | ISO ePM10 |
| Efficiency exhaust filter according to ISO 16890-1:2016 | 50 % |
| With condensate drain | Sí |
| Frost protection circuit | Sí |
| With constant pressure control | Sí |
| With constant volume flow control | Sí |
| Connection voltage | 3x 400 V AC +N |
| Electrical connection | Terminals |
| With thermal overload protection | No |
| Power consumption | 2.2 kW |
| Thermal efficiency | 83 % |
| Suitable for electronic control | Sí |
| Suitable for low-current control | No |
| With rotational speed/frequency control | Sí |
| Suitable for transformer control | No |
| Nominal duct width indoor connection | 560 mm |
| Nominal duct height indoor connection | 620 mm |
| Nominal duct width, outdoor connection | 560 mm |
| Nominal duct height, outdoor connection | 620 mm |
| Nominal duct diameter, indoor connection | 450 mm |
| Nominal duct diameter, outdoor connection | 450 mm |
| Conexión | Flange |
| Degree of protection (IP) | IP54 |
| Longitud | 2395 mm |
| Anchura | 1430 mm |
| Altura | 730 mm |
| With roof plate | No |
| With support frame | Sí |
| Weight | 377 kg |
| Device emplacement | Indoor and outdoor positioning |